Figure 4-16: Network Settings - Fixed Ip; Figure 4-17: Enter Ip Address; Figure 4-18: Edit Subnet Mask; Figure 4-19: Enter Subnet Mask - Linksys WIP330 User Manual

Fixed IP
If Fixed IP is selected as the IP Mode, the screen will show these settings: IP Address, Subnet Mask,
Default Gateway, Primary DNS, and Secondary DNS.
IP Address. To add or change the IP Address, select Edit. Enter the new IP Address in the new
window. Press the center selection key to save the new information, or select Exit to return to the
previous menu.
Subnet Mask. To add or change the Subnet Mask, select Edit. Enter the new Subnet Mask in the
new window. Press the center selection key to save the new information, or select Exit to return to
the previous menu.
Default Gateway. To add or change the Default Gateway, select Edit. Enter the new IP address of the
Default Gateway in the new window. Press the center selection key to save the new information, or
select Exit to return to the previous menu.
Primary DNS. To add or change the Primary DNS address, select Edit. Enter the new DNS IP address
in the new window. Press the center selection key to save the new information, or select Exit to
return to the previous menu.
Secondary DNS. To add or change the Secondary DNS address, select Edit. Enter the new DNS IP
address in the new window. Press the center selection key to save the new information, or select
Exit to return to the previous menu.
Chapter 4: Configuring the Wireless-G IP Phone
Settings of the Wireless-G IP Phone
Figure 4-16: Network Figure 4-17: Enter IP
Settings - Fixed IP
Figure 4-18: Edit Subnet
Mask
Wireless-G IP Phone
Address
Figure 4-19: Enter
Subnet Mask
35