Keyboard Entry; Touchscreen Entry - LXE VX5 User Manual

Enter Data

Keyboard Entry

The keyboard is used to manually input data that is not collected otherwise. Almost any function
that a full sized computer keyboard can provide is duplicated on the LXE VMT keyboard but it
may take a few more keystrokes to accomplish a keyed task.
Almost every key has two or three different functions. The primary alpha or numeric character is
printed on the key.
For example, when the <2
nd
the <2
is printed above the corresponding key.
Please refer to "Appendix A Key Maps" for instruction on the specific keypresses to access all
PC-compatible keyboard functions.

Touchscreen Entry

Note:
Note:
The touchscreen input performs the same function as the mouse that is used to point to and click
elements on a desk top computer. The stylus is used in the same manner as a mouse – single tap or
double tap to select menu options, drag the stylus across text to select, hold the stylus down to
activate slider bars, etcetera. The right mouse click function can be configured as follows:
When using a stylus, hold the stylus as if it were a pen or pencil. Touch an element on the screen
with the tip of the stylus then remove the stylus from the screen. The touch screen responds to an
actuation force (touch) of up to 4 oz. of pressure.
The touch screen can be used in conjunction with the keyboard and an input/output device
connected to one of the VX5's serial ports.
E-EQ-VX5OGWW-F
Refer to "Appendix A Key Maps" for specific keypresses.
nd
> key is selected pressing the desired second-function key produces
nd
> character i.e. <2 > + F1 toggles the CAPS Lock function. The specific <2
This section is directed to the VX5 user. The assumption is that the unit has been
configured and the touch panel calibrated by the System Administrator prior to releasing
the VX5 for use.
Always use the point of the stylus for tapping or making strokes on the display. Never use
an actual pen, pencil or sharp object to write on the touch screen.
•
Press and hold <Ctrl> key then touch the touchscreen (this is the only option
available with the 60-key keyboard).
•
Press and release <Ctrl> key then touch touchscreen..
•
Touch the stylus to the field of the data entry form to receive the next data feed.
•
The cursor begins to flash in the field.
•
The unit is ready to accept data from either the keyboard or a device connected to a
serial port.
81
nd
> character
VX5 User's Guide