Fuse Replacement For The Vx5; Figure 71 Fuse Replacement - LXE VX5 User Manual

Fuse Replacement for the VX5

Fuse Replacement for the VX5
The VX5 uses a 100V, 10A time delay (slow blow), high current interrupting rating fuse that is
externally accessible and user replaceable. Should it need replacement, replace with same size,
rating and type of fuse – Littlefuse 0234010 or Optifuse MSC-10A (5x20mm).
U L
C US
®
PRODUCT OF U.S.A. U.S. PATENT 5862393
1.
2.
3.
4.
5.
6.
E-EQ-VX5OGWW-F
CAUTION: For continues protection against risk of fire,
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
replace only with same type and rating of fuse.
This Class A digital apparatus complies with
OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
Canadian ICE-003.
ATTENTION: Pour ne pas compromette la preotection
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
Cet appareil num érique de la Classe A est
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE contre les risques d'incendie, remplacer par un fusible
confirme l à n orme NMB-003 du Canada
THAT MAY CAUSE UNDESIRED OPERATION.
de m mes types de m mes caract ristques nominales. ê
AUDIO
INPUT:
12-80VDC
6A 72W
ETHERNET /
USB
T10A, 125V
1

Figure 71 Fuse Replacement

Turn the VX5 off and disconnect the power cable from the VX5.
Fuse has voltage on it even when power is off. Always disconnect input
Caution:
power before changing fuse.
!
While holding the VX5 over a level surface, push the fuse cover in and twist it one
quarter turn counterclockwise. A flat head screwdriver may be used to twist the fuse
cover.
Remove the fuse.
Discard the fuse and place a new fuse in the holder.
Push the fuse in and twist it clockwise one quarter turn.
Reconnect the power cable to the VX5.
ê é
2 3
71
1. Fuse
2. Twist in this
direction to
remove
3. Twist in this
direction to insert
VX5 User's Guide