Vehicle 12-80Vdc Power Connection; Figure 64 Vehicle Power Connection Cable (Fuse Not Shown); Figure 65 Connecting The Power Cable To The Vehicle - LXE VX5 User Manual

64

Vehicle 12-80VDC Power Connection

Caution:
!
Caution:
!
Warning:
!
GND
3
4
Note:
VX5 User's Guide
For proper and safe installation, the input power cable must be connected to a
fused circuit on the vehicle. This fused circuit requires a 10 Amp maximum
time delay (slow blow) high interrupting rating fuse. If the supply connection
is made directly to the battery, the fuse should be installed in the positive lead
within 5 inches of the battery positive (+) terminal.
For installation by trained service personnel only.
Risk of ignition or explosion. Explosive gas mixture may be vented from
battery. Work only in well ventilated area. Avoid creating arcs and sparks at
battery terminals.
1
+
3
-
4 6
5

Figure 64 Vehicle Power Connection Cable (Fuse Not Shown)

1
2
5

Figure 65 Connecting the Power Cable to the Vehicle

Correct electrical polarity is required for safe and proper installation. Connecting the
cable to the VX5 with the polarity reversed will cause the VX5's fuse to be blown. See the
following figure titled "Vehicle Connection Wiring Color Codes" for additional wire
color-coding specifics.
Vehicle 12-80VDC Power Connection
2
6
7
8
1. To Vehicle Battery
2. To Vehicle
Mounted Device or
UPS Battery Pack
3. White (DC+)
4. Black (DC-)
5. Green (GND)
6. 12 – 80 VDC
1. Vehicle Electrical
System
2. 10 Amp Slow
Blow Fuse
3. DC +
4. DC -
5. Vehicle Chassis
6. White
7. Black
8. Green
E-EQ-VX5OGWW-F