Reset Key Sequence (Reboot); Factory Default Settings - LXE VX5 User Manual

74

Reset Key Sequence (Reboot)

Note:
To reboot the VX5 without turning the computer off, press
and select Shut Down from the Task Manager window.
When the system is rebooted, Windows performs a controlled shutdown, closing any open
programs, before shutting down the Windows operating system. The current contents of RAM are
lost when rebooting. It is recommended to save any needed data and exit in an orderly fashion
from any running programs before rebooting.
When the VX5 is turned on or rebooted, the following settings are restored from flash memory
and are configured using BIOS Setup.
Note:

Factory Default Settings

Boot Sequence
Legacy Floppy (A and B)
Primary and Secondary
Master and Slave drives
Display POST Msgs
Show Summary Screen
Note:
VX5 User's Guide
The <CTRL> + <ALT> + <DEL> function can be used to shut down a Microsoft
Windows application or reboot the computer.
Manager" window (Windows XP).
<CTRL> + <ALT> + <DEL>
Options in the Microsoft Windows Control Panel make access to the BIOS unnecessary
in many cases. Only those setting not controlled by Windows are listed below. For more
information on Windows settings, please refer to commercially available Windows
guides.
Removable Devices (i.e. USB floppy drive), Hard Drive, CD-
ROM drive, Network boot (i.e. PXE) in this order
Disabled
Auto
Disabled
Disabled
This is a partial listing. Please review the instructions and warnings on modifying the
BIOS in the "VX5 Reference Guide" before changing the BIOS. Use caution when
changing BIOS settings as unexpected results may occur if improper values are used.
Powering On/Off
The keypress brings up the "Task
E-EQ-VX5OGWW-F