Front Camera (Main Unit) - Rear View - Thinkware QA200 User Manual

Product overview
• To reset the product, press and hold the voice recording (
you hear beeps.
• The security LED status may vary depending on the selected mode.
• Refer to the following table to check the status of the product using the LED indicators.
For more information about the REC LED, refer to "3.3 Using the continuous recording feature" on page 17.
LED
BT/WiFi
GPS
Misc.

1.2.2 Front camera (main unit) - rear view

8
LED status
(light on) /
>
Wi-Fi REC
>
Microphone
Used for voice recording.
Memory card slot
Insert a memory card to save recordings.
Security LED
Indicates that video
is being recorded.
) and REC (
(light on)
(flickers)
(flickers)
(light on for 5 seconds)
(light on)
GPS (flickers)
>
Mount connector
Used to connect the mount.
) buttons simultaneously until
Operation description
Wi-Fi connected
Bluetooth on/Bluetooth pairing
Bluetooth/Wi-Fi reset
When pressing the Wi-Fi button
when Bluetooth/Wi-Fi is OFF in a
high temperature environment
GPS connected
Firmware upgrade
Reset button
Insert the tip of a sharp object to reset
the product when an error occurs.
Front camera lens
Records the front view.