Setting Road Safety Features; Configuring The System Settings - Thinkware QA200 User Manual

6.4 Setting road safety features

From the mobile viewer, tap Dash Cam settings
settings.
Options
Safety Cameras
Mobile Zone Alert
Vehicle Type
Initialize ADAS
LDWS
(Lane Departure Warning)
LDWS Speed
FCWS
(Forward Collision Warning)
Low Speed FCWS
FVDW (Front Vehicle Departure
Warning)

6.5 Configuring the system settings

From the mobile viewer, tap Dash Cam Settings
settings.
Options
Language
Volume
Security LED
Time Zone
Daylight Saving
Speed Unit
Speed Stamp
If you select 0 for the volume level, the voice guidance will be disabled.
Road Safety Settings to manage the road safety features
>
Select from Enabled/Disabled for the safety cameras.
Select from Enabled/Disabled for the mobile zone alert.
Select the vehicle type from Sedan/SUV/Truck (Bus).
In Initialize ADAS, tap Initialize
Select from Disabled/Low/Mid/High for the LDWS sensitivity.
Select from 50km/h / 60km/h / 80km/h / 100km/h for the LDWS detection speed.
Select from Disabled/Low/Mid/High for the sensitivity.
Select from Disabled/Low/Mid/High for the sensitivity.
Select from Enabled/Disabled for the FVDW feature.
System Settings to configure the hardware system
>
Select the desired language.
Select the desired volume level for each feature (Safety Cameras/ADAS/System).
Select the desired mode to use the security LED.
Select the date and time.
Select from Enabled/Disabled for the daylight saving.
Select from km/h/mph for the speed unit.
Select from Enabled/Disabled for the speed stamp.
Description
OK to proceed with initializing.
>
Description
Settings
27