Refer to the following table to set the Parking Mode options.
Option
No motion
or impact
detected
Motion
Motion
Detection
detected
Impact
detected
No impact
detected
Time Lapse
Impact
detected
No impact
detected
Energy
Saving
Impact
detected
OFF
If parking mode settings are changed, the videos recorded with the previous settings will be deleted. To
prevent data loss, back up all parking mode videos before changing parking mode settings.
You cannot use Motion Detection, Time Lapse, or Energy Saving at the same time.
Operation description
Monitors movement in the area or impacts to the vehicle. Video
will be recorded only when motion or an impact is detected.
When a moving objects is detected while parking, a video is
recorded for 20 seconds, from 10 seconds before detection to
10 seconds after detection, and stored in the "motion_timelapse_
rec" folder.
When an impact is detected while parking, a video is recorded
for 20 seconds, from the moment 10 seconds before detection to
10 seconds after detection, and stored in the "parking_rec" folder.
A videos is recorded at a rate of 2 fps for 10 minutes, compressed
into a 2-minute long file, and stored in the "motion_timelapse_
rec" folder. Since the video file recorded with this option is small,
you can record a long video.
When an impact is detected while parking, a video is recorded
for 100 seconds at a rate of 2 fps, from the moment 50 seconds
before detection to 50 seconds after detection, and stored in the
"parking_rec" folder after being compressed into a 20-second
long file. (The buzzer will sound.)
Monitors impacts to the vehicle. Video will be recorded only
when an impact is detected.
When an impact is detected while parking, a video is recorded for
20 seconds from within 1 second after detection and stored in the
"parking_rec" folder.
The product is powered off when electric accessories and the
engine are turned off.
Using recording features
Recording LED (REC)
(flickers slowly)
(flickers)
(flickers)
(light on)
(flickers)
Off
(flickers)
Off
19
Need help?
Do you have a question about the QA200 and is the answer not in the manual?
Questions and answers
what is a mobile wiewer?
The mobile viewer for the Thinkware QA200 is an application that allows users to connect the product to a smartphone and view recorded videos. It provides a specific screen layout for accessing and managing video recordings. Users can follow on-screen instructions to connect the device to their smartphone.
This answer is automatically generated