Chapter 4 — Media Load
Peel-Off , cont.
5
Remove any empty core from the media
supply hub.
6b
In case of a media roll with a 76 mm (3-
inch) core, fi rst fi t two adapters on the
media supply hub.
32
6a
Fit a new roll of media on the media
supply hub and push the roll inwards as
far as it will go.
7
Route the media underneath the slack
absorber and forward towards the print
mechanism. The slack absorber can be
rotated for better access and snap-
locked in open positon.
EasyCoder PX6i User's Guide (Fingerprint version)