Tear-Off (Straight-Through) - Intermec EasyCoder PX6i User Manual

Chapter 4 — Media Load
Tear-Off (Straight-through)
The EasyCoder PX6i can print on labels, tickets, tags, and continuous
stock in various forms. This section describes the case when the media
is torn off manually against the printer's tear bar. This method is also
known as "straight-through printing."
Use the <Feed> key (see fi gure #14) when loading the same type of
media as before. When switching to a new type of media, or if the
printer does not feed out the media properly, simultaneously press the
<Shift> and <Feed> keys to perform a "testfeed."
Tear-off can be used for:
• Non-adhesive continuous stock
• Self-adhesive continuous stock with liner
• Self-adhesive labels with liner
• Tickets with gaps, with or without perforations
• Tickets with black marks, with or without perforations
An optional label taken sensor can hold the printing of the next copy
in the batch until the present copy has been removed, see Chapter 9,
"Options."
20 EasyCoder PX6i User's Guide (Fingerprint version)