I Break-In Function; D Semi Break-In Operation; D Full Break-In Operation - Icom IC-7800 Instruction Manual

I Break-in function

D D Semi break-in operation
[KEY SPEED] (inner control)
[VOX/BK-IN] [CW]
D D Full break-in operation
[DELAY] (outer control)
FUNCTIONS FOR TRANSMIT
The break-in function is used in CW mode to automat-
ically toggle the transceiver between transmit and re-
ceive when keying. The IC-7800 is capable for full
break-in or semi break-in.
During semi break-in operation, the transceiver selects
transmit when keying, then automatically returns to re-
ceive after a pre-set time after you stop keying.
q Push [CW] to select CW or CW-R mode.
w Push [VOX/BK-IN] several times to turn the semi
break-in function ON.
• "BK IN" appears.
e Rotate [DELAY] to set the break-in delay time (the
delay from transmit to receive).
When using a paddle, rotate [KEY SPEED] to adjust
the keying speed.
During full break-in operation, the transceiver auto-
matically selects transmit while keying and returns to
receive immediately after keying is finished.
q Push [CW] to select CW or CW-R mode.
w Push [VOX/BK-IN] several times to turn the full
break-in function ON.
• "F-BK IN" appears.
When using a paddle, rotate [KEY SPEED] to adjust
the keying speed.
6-3
6