Datamax Allegro 2 Operator's Manual page 8

Troubleshooting
4.0 Introduction .....................................................59
4.1 Controlling print quality ...................................60
4.2 Aligning the Printhead ......................................61
4.2.1 Printhead Alignment Procedure .........63
4.2.2 Adjusting Printhead Pressure/Support 65
4.3 Troubleshooting .................................................66
Maintenance
5.0 Introduction .....................................................69
5.1 Cleaning Schedule............................................70
5.2 Cleaning the Printhead......................................70
Appendix A
ASCII Control Code Chart.................................A-1
Appendix B
Switch Settings and Cable Interfacing................B-1
Appendix C
Available Fonts and Barcodes ............................C-1
Appendix D
Error Codes .......................................................D-1
Appendix E
Cable Listings ....................................................E-1
Appendix F
Specifications.....................................................F-1
Appendix G
Warranty Information ........................................G-1
ii