Datamax Allegro 2 Operator's Manual page 46

Description
Heat Factor
Print Speed
Slew Speed
Dot Pattern Wide
Dot Pattern High
Label Advance
(Back Feed)
Form Edge Offset
Row Offset
Column Offset
Update Count on
Max. Label Width
Max. Label Length
Active Buffers
Cut By Amount
Edge/Reflective
If ALT-P parameters are changed while in the Create/Modify Label
Screen, the changes are saved with the label format. If they are
changed in the Print Label Screen, they are not saved and will affect
only the current print job. Changing parameters in the Print Label
Screen is useful when testing a new label to determine optimum
print parameter settings for that particular format.
F7 and ALT-I: This function is used in the Create/Modify Label
F8 and ALT-X: May be pressed while the cursor is located at the ROT
38
Creating Labels Using Internal Batch Software
Default
10
C
C
1
1
220
220
000
000
01
410
1200
1
0001
E
Table 3-2 Print Parameters
Screen to insert a new field description line between
existing field description lines on the screen. It is
especially useful when the Repeat Function is used and
other lines on the screen are already below the field to
be repeated.
field of the Create/Modify Label Screen. It will cause
the Print Screen to show a pre-set quantity of 1 for the
purposes of printing a test label.
Range
0 to 20
C-E
C-E
1 or 2
1 to 3
Form Edge Offset to
Form Edge Offset + 200
050 to 999
000 to 999
000 to 410
01 to 99
050 to 410
0500 to 9999
1 or 2
0001 to 9999
E or R
Allegro2