Nic Connector; Nic Specifications - HP Compaq d330 DT Technical Reference Manual

5.9.5 NIC CONNECTOR

Figure 5-14 shows the RJ-45 connector used for the NIC interface. This connector includes the
two status LEDs as part of the connector assembly.
Speed LED
Figure 5-15. Ethernet TPE Connector (RJ-45, viewed from card edge)

5.9.6 NIC SPECIFICATIONS

Table 5-27. 82559 NIC Operating Specifications
Parameter
Modes Supported
Standards Compliance
OS Driver Support
Boot ROM Support
F12 BIOS Support
Bus Inteface
Power Management Support
8 7 6 5 4 3 2 1
Table 5-27.
NIC Specifications
10BASE-T half duplex @ 10 Mb/s
10Base-T full duplex @ 20 Mb/s
100BASE-TX half duplex @ 100 Mb/s
100Base-TX full duplex @ 200 Mb/s
1000BASE-T half duplex @ 1 Gb/s
1000BASE-TX full duplex @ 2 Gb/s
IEEE 802.2
IEEE 802.3 & 802.3x
IEEE Intel priority packet (801.1p)
MS-DOS
MS Windows 3.1
MS Windows 95 (pre-OSR2), 98, and 2000
Professional, XP Home, XP Pro
MS Windows NT 3.51 & 4.0
Novell Netware 3.x, 4.x, 5x
Novell Netware/IntraNetWare
SCO UnixWare 7
Linux 2.2, 2.4
PXE 2.0
Intel PRO/100 Boot Agent (PXE 3.0, RPL)
Yes
PCI 2.2
ACPI, PCI Power Management Spec.
hp compaq d330 and d530 Series of Personal Computers
Featuring the Intel Pentium 4 Processor
First Edition – June 2003
Technical Reference Guide
Activity LED
Pin Description
1 Transmit+
2 Transmit-
3 Receive+
6 Receive-
5-37