Audio Subsystem; Specifications - HP Compaq d330 DT Technical Reference Manual

Chapter 2 System Overview

2.4.10 AUDIO SUBSYSTEM

These systems use the integrated AC97 audio controller of the chipset and the ADI 1981B audio
codec. These systems include microphone and line inputs and headphone and line outputs and
include a 3-watt output amplifier driving an internal speaker. All models feature front panel-
accessible microphone in and headphone out audio jacks as standard.
2.5

SPECIFICATIONS

This section includes the environmental, electrical, and physical specifications for the systems
covered in this guide. Where provided, metric statistics are given in parenthesis. Specifications are
subject to change without notice.
Table 2-6. Environmental Specifications
Parameter
Ambient Air Temperature
Shock (w/o damage)
Vibration
Humidity
Maximum Altitude
NOTE:
[1] Peak input acceleration during an 11 ms half-sine shock pulse.
[2] Maximum rate of change: 1500 ft/min.
Table 2-7. Electrical Specifications
Parameter
Input Line Voltage:
Nominal:
Maximum:
Input Line Frequency Range:
Nominal:
Maximum:
Power Supply:
Maximum Continuous Power:
USDT
ST or SFF
DT, MT, or CMT
Maximum Line Current Draw:
USDT
SF or SFF
DT, MT, or CMT
2-20 hp compaq d330 and d530 Series Personal Computers
Featuring the Intel Pentium 4 Processor
Table 2-6.
Environmental Specifications (Factory Configuration)
Operating
o o o
50 to 95 F (10 to 35
of change < 10°C/Hr)
5 Gs [1]
2
0.000215 G /Hz, 10-300 Hz
10-90% Rh @ 28
wet bulb temperature
10,000 ft (3048 m) [2]
Table 2-7.
Electrical Specifications
First Edition– June 2003
o o o
C, max. rate -24 to 140
of change < 20°C/Hr )
0.0005 G
o
C max. 5-95% Rh @ 38.7
wet bulb temperature
30,000 ft (9144 m) [2]
U.S.
100 - 127 VAC
90 - 132 VAC
50 - 60 Hz
47 - 63 Hz
130 watts
185 watts
240 watts
5 A @ 100 VAC
5 A @ 100 VAC
6 A @ 100 VAC
Non-operating
o o
F (-30 to 60 C, max. rate
20 Gs [1]
2
/Hz, 10-500 Hz
o
C max.
International
200 - 240 VAC
180 - 264 VAC
50 - 60 Hz
47 - 63 Hz
130 watts
185 watts
240 watts
2.5 A @ 200 VAC
2.5 A @ 200 VAC
3.0 A @ 200 VAC