Input/Output Interfaces
5.9.4 NIC Connector
Figure 5-12 shows the RJ-45 connector used for the NIC interface. This connector includes the
two status LEDs as part of the connector assembly.
Figure 5-12. RJ-45 Ethernet TPE Connector (as viewed from rear of chassis)
5.9.5 NIC Specifications
Parameter
Modes Supported
Standards Compliance
OS Driver Support
Boot ROM Support
F12 BIOS Support
Bus Inteface
Power Management Support
5-18
Speed LED
8 7 6 5
Table 5-12.
NIC Specifications
Compatibility standard orprotocol
10BASE-T half duplex @ 10 Mb/s
10Base-T full duplex @ 20 Mb/s
100BASE-TX half duplex @ 100 Mb/s
100Base-TX full duplex @ 200 Mb/s
1000BASE-T half duplex @ 1 Gb/s
1000BASE-TX full duplex @ 2 Gb/s
IEEE 802.1P, 802.1Q
IEEE 802.2
IEEE 802.3, 802.3ab, 802.3ad, 802.3u, 802.3x,
MS-DOS
MS Windows 3.1
MS Windows 95 (pre-OSR2), 98, and 2000
Professional, XP Home, XP Pro, Vista Home, Vista Pro
MS Windows NT 3.51 & 4.0
Novell Netware 3.x, 4.x, 5x
Novell Netware/IntraNetWare
SCO UnixWare 7
Linux 2.2, 2.4
PXE 2.0
Intel PRO/100 Boot Agent (PXE 3.0, RPL)
Yes
PCI Express x1
ACPI, PCI Power Management Spec.
Activity LED
Pin
1
2
3
6
4, 7, 8 Not used
4 3
2
1
802.3z
www.hp.com
Description
Transmit+
Transmit-
Receive+
Receive-
Technical Reference Guide