Front Bezel Security - HP Compaq 6000 Pro MT Maintenance And Service Manual

4. Insert the plug end of the security cable into the lock (1) and push the button in (2) to engage the
lock. Use the key provided to disengage the lock.
Figure 9-63

Front Bezel Security

The front bezel can be locked in place by installing a security screw provided by HP. To install the
security screw:
1. Prepare the computer for disassembly
2. Remove the access panel
3. Remove the front bezel
4. Remove one of the five silver 6-32 standard screws located on the front of the chassis behind the
bezel.
Figure 9-64
5. Replace the front bezel.
172 Chapter 9 Removal and Replacement Procedures Small Form Factor (SFF) Chassis
Engaging the Lock
(Access Panel on page
(Front Bezel on page
Retrieving the Front Bezel Security Screw
(Preparation for Disassembly on page
123).
124).
122).