Removing Bezel Blanks - HP Compaq 6000 Pro MT Maintenance And Service Manual
Business pc
Hide thumbs
Also See for Compaq 6000 Pro MT:
- Maintenance & service manual (125 pages) ,
- Troubleshooting manual (67 pages) ,
- Hardware reference manual (67 pages)
Table of Contents
Advertisement
Removing Bezel Blanks
On some models, there are bezel blanks covering the 3.5-inch and 5.25-inch external drive bays that
need to be removed before installing a drive. To remove a bezel blank:
1.
Remove the access panel and front bezel.
2.
To remove a bezel blank, push the two retaining tabs that hold the bezel blank in place towards
the outer right edge of the bezel (1) and slide the bezel blank back and to the right to remove it
(2).
Figure 8-4
Removing a Bezel Blank
Removing Bezel Blanks
79
Advertisement
Table of Contents
