HP Compaq 6000 Pro MT Maintenance And Service Manual page 145
Business pc
Hide thumbs
Also See for Compaq 6000 Pro MT:
- Maintenance & service manual (125 pages) ,
- Troubleshooting manual (67 pages) ,
- Hardware reference manual (67 pages)
Table of Contents
Advertisement
6.
Store the removed card in anti-static packaging.
7.
If you are not installing a new expansion card, install an expansion slot cover to close the open
slot.
CAUTION:
After removing an expansion card, you must replace it with a new card or expansion
slot cover for proper cooling of internal components during operation.
8.
To install a new expansion card, hold the card just above the expansion socket on the system
board then move the card toward the rear of the chassis so that the bracket on the card is aligned
with the open slot on the rear of the chassis. Press the card straight down into the expansion socket
on the system board.
Figure 9-12
Installing an Expansion Card
NOTE:
When installing an expansion card, press firmly on the card so that the whole connector
seats properly in the expansion card slot.
Expansion Cards 133
Advertisement
Table of Contents
