Appendix F Specifications; Microtower Chassis - HP Compaq 6000 Pro MT Maintenance And Service Manual

F Specifications
This chapter provides specifications for the microtower and small form factor chassis.

Microtower Chassis

Table F-1 Specifications
Desktop Dimensions
Height
Width
Depth
Approximate Weight
Temperature Range
Operating
Nonoperating
Relative Humidity (noncondensing)
Operating
Nonoperating (38.7°C max wet bulb)
Maximum Altitude (unpressurized)
Operating
Nonoperating
NOTE: Operating temperature is derated 1.0° C per 300 m (1000 ft) to 3000 m (10,000 ft) above sea level; no direct sustained
sunlight. Maximum rate of change is 10° C/Hr. The upper limit may be limited by the type and number of options installed.
Heat Dissipation
Max STD PS
Typical STD PS idle
Max EPA 87/89/85% @ 20/50/100% load PS
Typical EPA 87/89/85% @ 20/50/100% load PS idle
14.85 in 37.72 cm
6.95 in 17.65 cm
16.85 in 42.80 cm
23.5 lb 10.66 kg
50° to 95°F 10° to 35°C
-22° to 140°F -30° to 60°C
10-90% 10-90%
5-95% 5-95%
10,000 ft 3048 m
30,000 ft 9144 m
1410 BTU/hr 356 kg-cal/hr
TBD BTU/hr TBD kg-cal/hr
1255 BTU/hr 316 kg-cal/hr
TBD BTU/hr TBD kg-cal/hr
Microtower Chassis 237