Envirovent KIT-PIV-SMOKE-200 Installation Manual page 7

PIV Air Source box contents
• 1x PIV Air Source unit
• 1x Loft Filter
• 2x Flexible filter rods
• 1x 150mm Inline filter
• 1x 200mm diffuser (+ 2x
blanking plates)
• 1x Instruction guide
• 1x Diffuser mounting template
• 1x Flexible duct (1m x 200mm
dia.)
• 1x Unswitched fuse spur
• 1x Remote control (Remote
Control units)
• 8x Foam pads
• 4x Washers
• 4x Screws 10g x 3"
• 4x Screws 10g x 1.5"
• 4x Screws 8g x 1.5"
• 4x Screws 8g x 1"
• 4x Plasterboard plugs
• 1x Roll of fixing tape
AFTER INSTALLATION THE END USER SHOULD
KEEP THIS GUIDE FOR FUTURE REFERENCE
MIV Air Source box contents
• 1x MIV Air Source unit
• 1x Loft Filter
• 2x Flexible filter rods
• 1x 150mm Inline filter
• 2x 100mm diffusers
• 1x Instruction guide
• 2x Flexible ducts (3m x 100mm
dia.)
• 1x Unswitched fuse spur
• 1x Remote control (Remote
Control units)
• 8x Foam pads
• 4x Washers
• 4x Screws 10g x 3"
• 4x Screws 10g x 1.5"
• 4x Screws 8g x 1.5"
• 4x Screws 8g x 1"
• 4x Plasterboard plugs
• 4x 100mm duct fixings
• 1x Roll of fixing tape
DO NOT
THROW AWAY
6