Running Costs - Envirovent KIT-PIV-SMOKE-200 Installation Manual

Keypad Settings
Top button
-Press to show the current air
flow setting.
-The corresponding LED will
illuminate on the keypad.
-Further presses scroll through
the air flow rate settings 1,2,3
and 4 on a loop.
-Adjust this according to the
size, type and occupancy of the
property.
Wired comfort heater enable/disable
A switch to enable/disable the heater function can be connected up
to 3 metres away from the unit. This must be a volt free contact.
Do not wire the cable or switch into the Mains. When the switch is
pressed on, the comfort heater function is enabled and the system
will maintain the incoming air temperature at 10 °C. When the switch
is pressed off, the automatic comfort heater function is disabled.

Running costs

Please scan our QR code to
see the annual running costs
of this product.
Or visit: envirovent.com/annual-running-costs
AFTER INSTALLATION THE END USER SHOULD
KEEP THIS GUIDE FOR FUTURE REFERENCE
Bottom button
-Press to show the total
running time.
-The numeric display will
illuminate to show the total
amount of time the unit has
been running e.g. '1234'
(hours).
DO NOT
THROW AWAY
16