Envirovent KIT-PIV-SMOKE-200 Installation Manual page 3

Wiring Regulations
All wiring must comply with Building Regulations and the current IET
Wiring Regulations (BS7671 in the UK) or equivalent standards for other
countries. The final installation should be examined and tested by a
qualified electrician.
This product is not suitable for use with a Type AC RCD
Electrical Connection
The unit must be earthed and a suitable isolator with a minimum contact
separation of 3.0mm must be used to provide insulation for the unit.
The unit must be able to be disconnected from the mains supply after
installation. When wiring the unit, the included unswitched use spur should
be incorporated in the fixed wiring.
The power supply cable running into the unit must remain the supplied
flexible cable (not a solid core lighting cable). If the power supply cable
becomes damaged, it must be replaced by EnviroVent, an authorised
service agent for your region/country, or a similarly qualified person in
order to avoid a hazard. Do not remove or tamper with any electronic
components inside the product.
Users
The unit is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities or lack of experience and
knowledge, unless they have been given supervision and usage instruction
by a person responsible for their safety. Children should be supervised
to ensure they do not play with the unit. Cleaning and user maintenance
must not be performed by children.
DO NOT
AFTER INSTALLATION THE END USER SHOULD
KEEP THIS GUIDE FOR FUTURE REFERENCE THROW AWAY
2