Initial Startup; Information On Initial Operation; Starting Up - Webasto MultiControl Installation Instructions Manual

Fig. 04: Example of connecting control element (1) to heater (2)
MultiControl | SmartControl
1
2
6

Initial startup

6.1

Information on initial operation

WARNING
Inhaling poisonous gases in the enclosed
rooms
Danger of poisoning and suffocation:
Never operate the heater (also not with program-
X
med heating start) in closed rooms such as ga-
rages or workshops that do not have an exhaust
extraction unit.
In workshops with exhaust extraction facilities,
X
make sure that the exhaust extractor is fully
operational.
6.2

Starting up

 Heater is correctly installed.

Control element is correctly installed.
 Vehicle on-board power supply is connected to the battery
voltage.
Select heater
Manual heater selection is omitted in the event of
automatic heater detection.
Rotate the control knob and select the installed heater.
Fig. 05: "Heater" menu element
Press the control knob.
X
Setting the day of the week:
Fig. 06: Day of the week
Rotate the control knob, select weekday.
X
Fig. 07: Setting the time
Mo
7