Card And Card Slot Precautions; Loading And Removing A Memory Card - Casio XW-P1 User Manual

Using a Memory Card

Card and Card Slot Precautions

• Be sure to observe the precautions provided in the
documentation that comes with the memory card.
• Memory cards have a write-protect switch. Use it when you
want to protect the data on the card from accidental
deletion.
• Avoid using a memory card under the following conditions.
Such conditions can corrupt data stored on the memory
card.
– Areas subjected to high temperature, high humidity, or
corrosive gas.
– Areas subjected to strong electrostatic charge and digital
noise.
• Never touch the contacts of a memory card when loading it
or removing it from the Synthesizer.
• The message "Please Wait" will remain on the display while
a data save operation is in progress. Do not perform any
other operation while it is displayed.
Turning off the Synthesizer or removing the memory card
can cause Synthesizer data to be deleted or become
corrupted. It also can cause the Synthesizer to fail to turn
6
on when POWER is pressed. If this happens, refer to
"Troubleshooting" (page E-82).
• If the message "No Card" appears on the display, it means
there is no memory card in the card slot. For details about
what appears on the display while a card is loaded, see
"Playing a Music File from a Memory Card" (page E-78).
• Never insert anything besides a memory card into the card
slot. Doing so creates the risk of malfunction.
• Electrostatic charge from your fingers or the memory card
to the card slot can cause malfunction of the Synthesizer. If
this happens, turn the Synthesizer off and then back on
again.
• A memory card can become quite warm after very long use
in the card slot. This is normal and does not indicate
malfunction.
E-74
Loading and Removing a Memory
Card
• A memory card must be positioned correctly when
being loaded into the Synthesizer. Trying to force an
improperly oriented memory card into the slot can
damage the memory card and the slot.
1.
With the top of the memory card facing
upwards (so you can see it), carefully insert it
into the Synthesizer's SD card slot (
stops with a click.
2.
To remove the memory card first press it into
the slot further.
• This will cause the memory card to disengage and eject
partially. Pull the memory card the rest of the way out of
the slot.
bt
) until
Top