Casio XW-P1 User Manual page 33

■ Editable Parameters for All Layers (Layer 1 through Layer 6)
Preparation
Display the screen in step 2 of the procedure under "To edit and save a tone as a user tone" on page E-21.
Editable Parameter List
• Shaded cells indicate a group made up of multiple items. Press
Display Text
Detune
Pitch LFO >Ent
WaveType
Rate
Depth
Delay
Rise
Mod.Depth
After Depth
Amp LFO >Ent
■ Editable Parameters Common to Other Tone Categories
See "Other Editable Items" on page E-29.
Detune. Causes the tuning of Layers 1 through 6 to be slightly different from each other. A
larger setting value increases the amount of detuning. The maximum value (31) results in
a difference of 100 cents (semitones) between Layer 1 and Layer 6.
Detune = 31
Detune = 0
Layer1
Pitch LFO. Group of editable LFOs applied to the pitch of a layered tone.
Wave type. Specifies a wave type to be used for LFO. The details of the selectable waves
are the same as those for "WaveType" of "Block (8): LFO1 and Block (9): LFO2 Editable
Parameters" (page E-28).
Rate. Specifies the LFO speed (frequency).
Depth. Specifies how LFO is applied.
Delay. Specifies the degree of delay in the timing for applying LFO.
Rise. Specifies the time it takes from the start of application of the LFO until the effect
reaches the level specified by Depth above.
Modulation depth. Specifies how modulation is applied to the LFO.
After depth. Specifies LFO change when MIDI channel after touch is received.
Amp LFO. Group of editable LFOs applied to the volume of a layered tone. Group items
and setting ranges are the same as "LFO (Pitch LFO)", above.
bq
ENTER to display the items that make up a group.
Description
+50cent
Layer4 Layer5
Layer2 Layer3
Selecting and Creating Tones
0 to 31
Layer6
− 50cent
Sin, Tri, SawUp,
SawDown, Puls1:3,
Puls2:2, Puls3:1
0 to 127
–128 to 0 to +127
0 to 127
0 to 127
0 to 127
0 to 127
Refer to the cell to the
left.
Settings
E-31