To Batch Save All Synthesizer Data To A Memory Card - Casio XW-P1 User Manual

Using a Memory Card
To save this
type of data:
Setting data 1. Press
2. Use the
buttons to move the item selection cursor
(0) to "CardUtility" and then press
ENTER.
3. Use the
buttons to move the item selection cursor
(0) to "SettingData" and then press
ENTER.
3. bq
Use the up (q) and down (w) buttons to
move the item selection cursor (0) to "Card
Save" (or "Save" if you want to save all data)
bq
and then press
• This displays a screen like the one shown below. (As
an example, the remainder of this procedure uses the
screen that appears when you perform these steps
from the Performance Mode.)
bq
4.
Press ENTER.
E-76
Perform these steps:
7
SETTING.
bq
up (q) and down (w)
bq
bq
up (q) and down (w)
ENTER.
5.
Select the bank and memory location number,
and input a file name. You can perform the
following steps to change the initial default file
name that is assigned automatically.
(1) Use the
to the character you want to change.
(2) Use the
buttons to change the character.
bq
• For details about inputting characters, see "Creating
Tones" on page E-12.
• The characters you can select are shown below.
0
A
K
U
(
• The three characters at the end of a file name are a file
name extension, which indicates the type of data stored
in the file.
6.
After everything is the way you want, press the
bq
(ENTER) button.
7.
In response to the "Sure?" message that
appears, press the
bq
the
To batch save all Synthesizer data to a
memory card
1.
Press
2.
Use the
move the item selection cursor (0) to
"CardUtility" and then press
• This causes the "CARD UTIL" screen to appear.
3.
Use the
move the item selection cursor (0) to "ALL
Data" and then press
bq
cursor (U, I) buttons to move the cursor
bo bq
dial or minus (–) and plus (+)
1 2 3 4 5
B C D E F G
L M N O P Q
V W X Y Z
) - ^ { } @
bq
YES button to save or
NO button to cancel.
7
SETTING.
bq
up (q) and down (w) buttons to
bq
up (q) and down (w) buttons to
bq
ENTER.
6 7 8 9
H I J
R S T
S & _ '
~ `
bq
ENTER.