Recording And Playing Back Phrases; To Play Back A Preset - Casio XW-P1 User Manual

Recording and Playing Back Phrases

The Phrase Sequencer is a great way to record musical
phrases that suddenly pop into your mind for later playback.
• The Sequencer has 100 preset phrases.
• You can record a new phrase or overdub onto an existing
phrase to create a user phrase. There is memory for
storage of up to 100 user phrases for later recall when you
need them.
• In addition to what you play on the keyboard, your pedal,
wheel, and knob operations are also recorded as part of
phrase.
• You can choose either of two different playback options:
one-time playback (loop off) or repeat playback (loop on).
• Overdubbing during looped playback is supported. You
also can temporarily cancel overdubbing and perform
looped playback only.
• Pressing a keyboard key will start playback of the phrase
from the corresponding pitch (Key Play).

To play back a preset

bn
1.
Hold down KEY PLAY until the preset
phrase selection screen shown below appears
on the display.
Phrase name
Loop setting
E-44
7
bk
2.
3.
4.
5.
Phrase number
Hold setting
bn
Select the number of the phrase you want to
play.
• To select a phrase number, perform the same
operation steps 3 through 6 for selecting a tone (page
E-20).
bk
Press STEP + to toggle looping between on
and off.
OFF : One-time playback
ON : Looped playback
bk
Press STEP – to toggle hold between on and
off.
OFF : Phrase plays back only while
depressed, and stops when the button is released.
ON : Phrase playback starts when
pressed and stops when
pressed again.
bn
Press PLAY/STOP to start phrase playback.
• If the phrase is looped, the
out momentarily to indicate when playback returns to
the beginning of the phrase.
• You can also use the above procedure to play back
user phrases as well.
• Phrase loop and hold settings are saved as parameters
for each phrase.
bp
bq
bn
PLAY/STOP is
bn
PLAY/STOP is
bn
PLAY/STOP is
bn
PLAY/STOP light will go