Using A Memory Card; Supported Data Types - Casio XW-P1 User Manual

Using a Memory Card

You can save Synthesizer user area data to a memory card
and load data from a memory card to Synthesizer memory.
You also can play music files (MIDI files) stored on a memory
card on the Synthesizer.
• Use a memory card that satisfies the
conditions below.
Format: SDHC or SD
Capacity: 32GB or less
Use of any memory cards other than
those defined above is not
supported.
• SDHC Logo is a trademark of SD-3C,
LLC.

Supported Data Types

■ Data that can be saved to and exported from a
memory card
Data Type
User performances
(page E-62)
User PCM melody tones
(page E-33)
User drawbar organ tones
(page E-32)
User hex layer tones
(page E-30)
User Solo Synthesizer tones
(page E-22)
User PCM drum tones
(page E-34)
User DSP data
(page E-39)
User step sequences
(page E-51)
Step sequence chains
(page E-61)
3
Description
(File Name Extension)
Performance data edited with the
Synthesizer (ZPF)
Melody tone data edited with the
Synthesizer (ZTN)
Drawbar organ tone data edited with
the Synthesizer (ZDO)
Melody hex layer tone data edited
with the Synthesizer (ZLT)
Solo Synthesizer tone data edited
with the Synthesizer (ZSY)
Drum tone data edited with the
Synthesizer (ZDR)
DSP data edited with the Synthesizer
(DS7)
Step sequence data recorded with
the Synthesizer (ZSS)
Sequence chain data recorded with
the Synthesizer (ZSC, MID (save
only))
7 bm
bk
Data Type
User phrases
(page E-44)
User arpeggios
(page E-41)
All data
Setting data
• For information about saving and importing individual data
items, see "Saving Synthesizer Data to a Memory Card"
(page E-75) and "Loading Data from a Memory Card" (page
E-77).
• For details about saving and loading all data, see "To batch
save all Synthesizer data to a memory card" (page E-76)
and "To batch load all Synthesizer memory data from a
memory card" (page E-77).
■ Data that can be directly played back from a
memory card
Data Type
Song files
(page E-78)
• If you want to use data stored on a memory card that is not
supported by this Synthesizer, you need either to copy the
data to a memory card supported by the Synthesizer, or
use Data Editor to transfer the data from a computer to the
Synthesizer. For more information, see "Connecting to a
Computer" (page E-79).
bo
Description
(File Name Extension)
Phrase data recorded with the
Synthesizer (ZPH)
Arpeggio data edited with the
Synthesizer (ZAR)
All of the above data (ZAL)
Setting data configure with the
Synthesizer (ZST)
Description
(File Name Extension)
SMF format 0 or 1 MIDI files (MID)
bq
E-73