Changing Slider Settings; To Copy Slider Settings From Another Slider - Casio XW-P1 User Manual

4. bq
cursor (U, q, w, I) buttons to
Use the
move the brackets % or the cursor to the item
whose setting you want to change, and then
bq
use the minus (–) and plus (+) buttons to
change the selected setting.
bl
• Use PATTERN to change the pattern number.
9
• Use the PART minus (–) and plus (+) buttons to
change the part name.
bk
• Use STEP minus (–) and plus (+) buttons to
change the step number.
• To return to the previous menu level, press
• The mixer screen shows current settings.
• While the Step Edit screen is displayed, the keyboard
will sound the tone of the currently selected part. The
mixer screen shows the settings of each step (the note,
velocity or value item that is currently being changed).
• On the mixer screen, notes are shown in a specific
position on the screen as C through B, regardless of the
actual octave.

Changing Slider Settings

In addition to the changes you can make using the simple
editing procedures (page E-51), you can also do the following.
• Copy settings from another slider
• Scale, drum, velocity slider presets
• Note shift

To copy slider settings from another slider

1
1.
Press STEP SEQUENCER.
2
2.
Hold down FUNC A/B until a screen like the
one shown below appears on the display.
bq
3.
Press MENU.
4.
Use the
move the item selection cursor (0) to the item
you want and then press
available on the screen are described below.
■ Copy: Copies settings from another slider.
Use the
brackets % to an item and then use the
plus (+) buttons to change the item's setting.
bq
EXIT.
Copy source sequence number
• Chord parts can be copied between chord parts only.
• Data being edited (!TEMP) can be specified as a copy
source.
■ Preset: Scale, drum, velocity slider presets
Use the
brackets [
plus (+) buttons to change the item's setting. Inputting a
slider preset number automatically causes the slide preset
name to change accordingly.
• The following shows the slider preset numbers and their
corresponding slider preset names.
1 Major, 2 Minor, 3 Dorian, 4 Lydian,
5 Mixolydn (Mixolydian), 6 Phrygian, 7 Locrian,
8 M.Minor (Melodic Minor), 9 H.Minor (Harmonic Minor),
10 H.M. 5th (Harmonic Minor 5th), 11 Altered (Altered),
12 WholeTon (Whole Tone), 13 Diminish (Diminished),
14 Pentaton (Pentatonic), 15 M.Penta (Minor Pentatonic),
16 Blues, 17 Kick (Bass Drum), 18 Snare, 19 Hi-hat,
20 Toms, 21 Cymbal, 22 Velocity
• The following are the chord part only slider preset numbers
and their slider preset names.
1 Diatonic, 2 Minor, 3 H.Minor (Harmonic Minor), 4 Velocity
Using the Step Sequencer
bq
cursor (U, q, w, I) buttons to
bq
cursor (U, q, w, I) buttons to move the
Copy destination pattern name
bq
cursor (U, q, w, I) buttons to move the
] to an item and then use the
Slider preset number
Pattern name
bq
ENTER. The items
bq
minus (–) and
FUNC A/B button setting
Pattern
FUNC A/B button setting
bq
minus (–) and
Slider preset name
FUNC A/B button setting
E-59