Casio XW-P1 User Manual page 59

Level 1 Level 2
Track Param >Ent
Max Step
Step Size
NoteLngth
Groove
Grv.Type
Ctrl.Ch
(Control part only)
Smooth
(Control part only)
Phrase No.
(Control part 4 only)
Key Shift >Ent
Beat Info
Level 3
Track parameter
Maximum step. Specifies the number of steps played back
by a part. If the specified maximum number of steps is
exceeded during playback, playback returns to the first step.
Step size. Specifies the note length between steps.
Note length. Note on note length specified as a percentage
of the step size. 100% specifies the same size as the
original, while 50% specifies a note length that is half the
original.
Groove. Specifies the on note timing of the off-beat step.
The step note length changed alternately by step playback.
50% specifies even, while a larger value increases the first
half note length.
Groove type. Specifies the note on note length type when
anything other than 50% is specified for Groove.
Control Channel. Specifies the channel that applies the
Control Track effect.
Smooth. Controls Control Track playback. When on, control
data is interpolated and played back
Phrase Sequencer number. Specifies the Phrase Sequencer
number to be controlled.
Key shift editing group. This setting cannot be configured for
Control 1 through 3. Real-time setting is not supported when
Control 4 is configured to perform Phrase Sequencer key
shift.
Enable Key shift on/off
BreakPoint Point between C and B where key shift drops the octave
when the key is exceeded.
Realtime Real-time. Specifies breakpoint timing.
Beat setting
Description
Using the Step Sequencer
Setting Range and
Screen Contents
1 to 16
2, 6, , 7, , 8
1 to 100%
10 to 90%
Norml: Normal Playback performed
with length based on actual
percentage.
Short: When step length is changed
by Groove, adjusts to the shorter
length.
Channel 1, 8 to 16
On, Off
P00 to 99, U00 to 99
Off, On
C to B
On: Change immediately
Off: Change at the next note
2/4 to 8/4, 2/8 to 16/8
E-57