Advertisement
Quick Links
Advertisement
Related Manuals for CRESTO RESQ Solo X
Summary of Contents for CRESTO RESQ Solo X
- Page 1 INSTRUCTION FOR USE SOLO X & SOLO X+...
- Page 2 Warning! Equipment use must be supported by the company’s own accident emergency proce- dures related to daily work. This document gives information about the correct use of the RESQ Solo X and Solo X+ in Warning! Do not make any alternations or additions to the equipment without the manu- diffe- rent situations.
- Page 3 OVERVIEW SOLO X AND SOLO X+ Back Front Device carabiner Device carabiner Swivel Brake house Brake house Friction points Markings Rope lock Use indicator Trailing rope Trailing rope Rope carabiner Rope carabiner...
- Page 4 Pre-check Note! Before use of the equipment always check the function and condition to ensure safe Ì Check the rope along its entire length for any signs of chafing, varying thickness, cuts, usage. If stored in the RESQ vacuum solution, only check that the vacuum is still intact. If chemical especially acids contact, change of shape, UV-deterioration, stiffness or other punctured you must inspect the function and condition of the equipment before use.
- Page 5 Note! This must always be in conjunction with the national and local requirements. Only connect to a structure with a minimum strength of 12kN or designed for the purpose. Strive to position as high above as possible and protect from edges that could damage the rope.
-
Page 6: Technical Specification
TECHNICAL SPECIFICATION MARKINGS Type: RESQ Solo X / RESQ Solo X+ Rope: Aramid hollow core rope 4,8mm Material: TWARON; Weight: 17g/m Certification: EN341:2011 cl.D SOLO X Compliance: ANSI/ASSE Z359.4-2013 Max descent height: 300m inspect equipment regulary check annually! Max descent load: min. - Page 7 BASIC EVACUATION TOP MOUNTED If the speed needs to be controlled during descent, you can add friction around the friction points as shown by taking the trailing rope around the friction point. If more friction is required, continue with the trailing rope into the friction slot and over the Attach the rescue rope carabiner to the harness attachment point (marked with A) or other friction point.
- Page 8 BASIC EVACUATION BODY MOUNTED If the speed needs to be controlled during descent, you can add friction around the friction points as shown by taking the trailing rope around the friction point. If more friction is required, continue with the trailing rope into the friction slot and over the Attach the rescue rope carabiner to the anchor point.
- Page 9 Solo X+ If stored, maintained as described and used in normal condition, the expected lifespan of this device is 10 Years. Note: For RESQ Solo X vacuum sealed, see ”Vacuum solution manual” for extended lifetime, inspection intervals and service guidelines.
-
Page 10: Inspection Criteria
You can also send the complete Prüfstelle IZ NÖ Süd Straße 15 product to Cresto Safety and we will take care of the recycling in order to reduce our impact Objekt 77, Stiege 2 on the environment.”... - Page 11 RESQ Solo X / RESQ Solo X+ Product Date Inspection results, notes Inspector, signature Manufacturer Cresto Safety Owner User Serial number / lot number Purchased on Seller First use Item number Inspections must be carried out at least once every 12 months by a competent person.
- Page 13 CRESTO SAFETY S.R.O Partizánska cesta 89 974 01 Banská Bystrica Slovakia Tel +421 48 414 70 74 support@cresto.com crestosafety.com...
Need help?
Do you have a question about the RESQ Solo X and is the answer not in the manual?
Questions and answers