Weather Guard 246-X-02 Installation Manual

TRUCK STORAGE SOLUTIONS
SECURING YOUR REPUTATION
ATTENTION: PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS
BEFORE ASSEMBLING, INSTALLING OR USING THIS PRODUCT.
246-X-02, 247-X-02, 260-X-02, 264-X-02, 265-X-02, 272-X-02, 290-X-02, 291-X-02, 296-X-02,
MODELS
297-X-02, 346-X-02, 347-X-02, 364-X-02, 365-X-02, 372-X-02, 390-X-02, 391-X-02, 396-X-02
Note: X represents the color code for your model: 0 = Clear | 3 = White |
NOTICE
Use specific aluminum upfit components when installing WEATHER GUARD®
products to aluminum truck beds. Follow additional instructions if mounting to
an aluminum truck bed. There may be left over components depending on upfit.
Any modification or unintended use of this product shall immediately void all
manufacturers warranties. Manufacturer disclaims all liability for injuries to
persons or property resulting from any modification to, or unintended use of
this product.
DANGER
Danger of explosion. Do not use this product for storing or transporting flam-
mables, explosives, hazardous materials, or hazardous waste, such as contain-
ers of gasoline, solvents, gun powder, dynamite, propane tanks, acetylene
tanks and cutting torches. Failure to heed this warning will result in death or
serious injury.
CAUTION
Prior to drilling, so as not to cut electric wires, fuel lines, brake lines, etc.,
check behind and underneath drilling and mounting locations. To keep debris
out of your eyes when checking the underside of the vehicle, or when drilling,
always wear protective eyewear. Failure to heed this warning may result in
moderate injury.
©2022 WERNER CO.
INSTALLATION MANUAL
ALUMINUM & STEEL HI-SIDE/SUPER-SIDE BOX STEEL & ALUMINUM SIDE BOX WITH PACK RAT
ER UNITS
®
5 = Black | 52 = Matte Black
WARNING
This product is only safe for use in storing and transporting small tools, equip-
ment and other similar materials.
This product can reduce the driver's ability to clearly see road-ways, vehicular
or pedestrian traffic and other objects through the rear and side windows of
the vehicle, which may cause an accident. Extra precautions should be taken
when driving a vehicle with this product. Make all adjustments necessary to
ensure maximum visibility, including but not limited to, changing mirror and
seating positions. State and local laws may prohibit obstruction of windows in
a moving vehicle.
These instructions are to be followed using parts and fasteners supplied for
proper installation. Any modifications or improper installation of this product
will create a hazardous condition that could result in death, serious personal
injury and/or property damage. All floor mounting bolts near the fuel tank
area should be installed from the underside of the vehicle, to guard against
the fuel tank being punctured in the event of a collision. This would mean not
using blind fasteners int his area. Holes in this area should be 5/16". Ensure
ample space in roof ribs and sidewall ribs for mounting screws so as not to
puncture exterior roof or wall.
Do not install this product where it could interfere with deployment of air
bags. Failure to comply could result in death or serious body injury.
® DRAW-
WEATHERGUARD.COM WEATHERGUARD.COM