Weather Guard 238 Assembly And Installation Instructions

ASSEMBLY AND INSTALLATION INSTRUCTIONS
Conduit Carrier 6" Extension - Model 238
IMPORTANT
BEFORE YOU BEGIN
Read these instructions and
warnings completely before
installation.

BOLT KIT

Bolt Kit #32-0236 is provided with
your extension. Check this bolt kit
to be sure the following parts are
included:
Quan. Description
10 1/4-20 x 3/4" Hex Hd. Bolt
20 1/4" Flat Washer
10 1/4-20 Nylon Lock Nut
This product is only intended for, and only safe for, transporting
tubing, pipe and conduit. It is the responsibility of the user to
secure these materials to the rack before transporting. Any mod-
ifications made to this product, or use of this product for any
other purpose than its intended use, could create a hazardous
condition that can cause serious personal injury or property
damage.

TOOLS REQUIRED

• 7/16" Open or Box End Wrench (2)
• Razor knife or scissors
1
WARNING

PARTS LIST

• Conduit Carrier Extension
• Weatherstripping (bulk)
Part No. 24-2380 REV. B ECN 5315 05/13