Safety; Use Of Symbols - Danfoss VACON NX Commissioning And Maintenance Manual

8 VACON
1.

SAFETY

This chapter contains the general safety instructions which you must follow when instal ling,
commissioning, operating and maintaining the HX-unit. Read the safety instructions before you start
to work on the unit.
1.1

USE OF SYMBOLS

For your own safety, please pay special attention to the instructions marked with the following
symbols:
WARNING
HOT SURFACE
!
NOTE
1
Risk of death. Instr uctions on pr eventing a possible sever e
hazar d to per sons or equipment.
Risk of damage. Instr uctions on pr eventing possible damage
to equipment.
Hot sur face. Instr uctions on pr eventing a possible minor
hazar d to per sons or equipment.
Notification
Local contacts: http:/ / dr ives.danfoss.com/ danfoss- dr ives/ local - contacts/
SAFETY