Rexing M2 Max User Manual page 28

•
Mute Video Recording (On, O ):
When mute is on, video is recorded with no audio. This function can be
directly switched on by clicking the
interface.
•
Rear Camera Mirroring (On, O ):
This feature displays a reverse image on-screen display for rear camera
view. On enables mirroring display and o displays the original image.
•
Time Stamp:
O , On
•
Parking Monitor (On, O ):
This feature is on when you see the illuminated
on the video recording interface, and it is o when you see the
grayed-out
state will be activated after the engine is turned o . When the car is
shocked by an external force and the sensor detects the impact, the
system will begin video recording (Intelligent hardwire kit required).
The characteristics and precautions of the parking monitor are as
the follows:
With the use of the smart hardwire kit (sold separately). After the car
1.
engine is turned o , the smart hardwire kit detects the power loss and
sends a command to the host device. The system enters a standby state.
The mini USB plug must always be kept connected to the USB port of the
device so as to ensure a constant power supply to the smart hardwire kit.
In parking mode, the dash cam will turn on, record a 15s video, lock the
2.
video, and then turn o again. When a recording is started, the screen
does not light up and there is no booting sound.
icon. When the parking monitor is activated, its standby
icon on the video recording
26
icon in the status bar