Scanning Only One Side Of A Document - Fujitsu ScanSnap S300 Operator's Manual

■ Scanning only one side of a document

By default, pressing the [SCAN] button
When you wish to use [Simplex scan], change the settings by following the procedure below.
Operation
1. Right-click the ScanSnap Manager icon
Button Settings] from the menu.
2. Click the [Scanning] tab and select [Simplex scan] from the [Scanning side:] drop-
down menu.
3. Click the [OK] button to save changes and close the window.
Operation
4. Load the document onto the ScanSnap.
132
on the ScanSnap starts scanning in Duplex mode.
on the taskbar, and then select [SCAN
S S