Using The Scansnap In Various Ways; Scanning Only One Side Of A Document - Fujitsu ScanSnap S1500M Operator's Manual

Using the ScanSnap in Various Ways

This section explains about various ways of using the ScanSnap.

■ Scanning Only One Side of a Document

By default, the ScanSnap scans in duplex mode.
To perform simplex scanning, perform the following steps to change the setting.
1.
Select [Scan Button Settings] from the Right-Click Menu.
For details about the Right-Click Menu, refer to
The ScanSnap setup dialog box appears.
2.
In the [Scanning side] drop-down list in the [Scanning] tab, select
[Simplex Scan (Single-sided)].
3.
Click the [OK] button to close the ScanSnap setup dialog box.
4.
Load a document in the ScanSnap.
For details about how to load documents, refer to
Using the ScanSnap in Various Ways (for Windows Users)
218
"Right-Click Menu" (page
"How to Load Documents" (page
70).
32).