Fujitsu ScanSnap S300 Operator's Manual page 170

2. Click the [Yes] button to delete the data that has been scanned up to the interruption,
or click the [No] button to save the data that has been scanned up to the interruption.
*Click the [Cancel] button not to quit but to return to the previous window.
ATTENTION
150
The [Continue Scanning] button may not be displayed on the window and an
error message like the example below may appear. In this case, it is not
possible to resume scanning. You will use Adobe Acrobat if you want to merge
two divided image files; this operation is only available for files of PDF format.
The following shows the procedures for this operation:
1. Confirm the last page scanned on the [Message] window.
2. Click the [Quit] button, then the following window appears.
3. Click the [No] button to save the image (PDF file) scanned before the
interruption (this file is called "File 001").
4. Scan the remaining documents (this part is called "File 002").
5. From the [Start] menu, select [All Programs]
[ScanSnap Organizer] to start ScanSnap Organizer.
6. Select [ScanSnap Organizer Viewer] from the [File] menu to open "File
001" and "File 002" one by one.
[ScanSnap Organizer]