3. Press the [SCAN] button
⇒
Scanning is started.
HINT
ATTENTION
⇒
The power indicator (lamp)
The following window appears to indicate the scanning status.
⇒
When the scanning is complete, the ScanSnap Quick Menu appears.
28
•
By default, documents are scanned in Duplex mode when you press the
[SCAN] button. In the [ScanSnap Manager - Scan and Save Settings] dialog
box, you can switch the scanning mode of the [SCAN] button to Simplex
mode.
•
Scanning can also be started by using the ScanSnap Manager icon
the taskbar.
For details about this operation, refer to
44).
•
Do not connect or disconnect other USB devices during the scanning
operation.
•
Do not close the paper chute during the scanning operation.
•
Do not switch the user to log in during the scanning operation. Otherwise, the
scanning is canceled.
on the ScanSnap.
"4.1 About the ScanSnap Icon" (page
on the ScanSnap blinks blue during the scanning operation.
on
S
S