Fujitsu ScanSnap S300 Operator's Manual page 201

Symptom
Black lines are Is the scanned document
produced on written with a pencil?
the scanned
document.
The scanned With [Automatic detection]
image is being selected in the [Paper
chipped/Slant size] drop-down list, was the
lines are document skewed during a
produced on scan?
the scanned
image/The
output image is
wider than the
original.
The ScanSnap Is the ScanSnap in Left-Click
Quick Menu is Menu Mode?
hidden.
Is ScanSnap Organizer or
CardMinder running?
The Left-Click Is the ScanSnap in Quick
Menu is hidden. Menu Mode? (Is the
ScanSnap Quick Menu
displayed after scanning?)
Is the [ScanSnap
Manager
Settings] dialog box open?
Applications Is the ScanSnap in Quick
cannot be Menu Mode?
selected in the In Quick Menu Mode, you do
[ScanSnap not have to select an
Manager - Scan application beforehand.
and Save You can select an
Settings] dialog application in the ScanSnap
box. Quick Menu after scanning.
Business cards In Quick Menu Mode,
cannot be business cards cannot be
scanned when scanned.
the ScanSnap
Quick Menu is
used.
Check This Item
Scan and Save
ScanSnap S300 Operator's Guide
7.2 Troubleshooting Checklist
Resolution
Black lines may be produced on scanned
documents written with a pencil, making
the rollers dirty or causing improper
paper feeding. To avoid such troubles,
clean rollers as often as possible.
For information about how to clean
rollers, refer to "8.2 Cleaning the Inside of
the Scanner" (page 185).
Neatly align the edges of paper sheets
with the side guide.
* If you are scanning documents of mixed
paper sizes, mark the [Scan mixed paper
size] checkbox (see page
load smaller documents so that they can
be fed straight.
If those documents cannot be fed
straight, it is recommended to scan only
documents of about the same size at a
time.
Mark [Use Quick Menu] on the Right-
Click Menu.
If these applications are running and one
of them is active, the ScanSnap interacts
with the active application and scanned
images are opened with it. Therefore, the
ScanSnap Quick Menu is not displayed.
To display the ScanSnap Quick Menu,
exit these applications or deselect them.
See section "4.5 About Automatic
Interaction with Applications" (page
On the Right-Click Menu, uncheck [Use
Quick Menu].
Close the [ScanSnap Manager
and Save Settings] dialog box.
If you want to select an application in
advance, use Left-Click Menu Mode.
To use Left-Click Menu Mode, uncheck
[Use Quick Menu] on the Right-Click
Menu.
Start CardMinder, and then press the
[SCAN] button with CardMinder being
active. Scanned business card images
are displayed in CardMinder.
67), carefully
84).
7
Scan
181