Fujitsu ScanSnap S300 Operator's Manual page 206

2. Clean the following locations with a cloth moistened with Cleaner F1.
Turn off the scanner before cleaning the following locations.
• Pad ASSY (1 piece)
Wipe the Pad ASSY downwards. When cleaning the Pad ASSY, take care to prevent the
cloth from catching on the metal parts.
• Glasses (2 pieces; located on the ADF and opposite side)
Gently wipe off dirt and dust from the ADF glass surfaces.
• White sheets (2 pieces; located on the ADF and opposite side)
White strips along the edge of the glass. Gently wipe off dirt and dust from the White
sheets.
• Pick roller (1 piece)
Clean lightly taking care not to scratch the surface of the roller. Take particular care in
cleaning the Pick roller since debris on the roller adversely affects the pickup performance.
• Plastic rollers (4 pieces on the ADF)
Clean them lightly while rotating the rollers with your finger. Be careful not to roughen the
surface of the rollers. Take particular care in cleaning the plastic rollers since debris on the
rollers adversely affects the pickup performance.
Turn on the scanner before cleaning the following locations, and clean the following rollers
while rotating them.
• Feed rollers (2 pieces)
Clean lightly taking care not to roughen the surface of the rollers. Take particular care in
cleaning the feed rollers since debris on the rollers adversely affect the pickup
performance.
186
Pad ASSY
Plastic roller (x4)
Eject roller (x2)
Feed roller (x2)
Glass (x2)
(2 places)
Pick roller
White sheet (x2)
(2 places)