Appendix D Installation Specifications - Fujitsu ScanSnap S300 Operator's Manual

Appendix D
Installation Specifications
The following table summarizes the installation specifications of this scanner.
Dimensions
(Note)
Weight
Input power
supply
Power
consumption
Temperature/
Humidity
Allowable
Ranges
Item
Width
Minimum (when paper 284 mm
chute is closed) 11.18 in.
Maximum (when 284 mm
paper chute is opened 11.18 in.
and paper chute guide
is extended)
1.4 kg (approximately 3.08 lb)
Voltage for power 100 - 240 V (varies regionally)
cable connection
Voltage for USB bus 5 V (PC must have two USB ports; one for power
power cable feeding, and the other for USB cable connection.)
connection
Number of phases Single-phase
Frequency 50/60 Hz
Power cable During operation: 9.0 W or less
connection During standby: 3.2 W or less
USB bus power cable During operation: 5.0 W or less
connection During standby: 2.0 W or less
Scanner state During
operation
Temperature 5 to 35 (°C)
41 to 95 (°F)
Humidity (%) 20-80
ScanSnap S300 Operator's Guide
Specifications
Depth Height
95 mm 77 mm
3.8 in. 3.08 in.
227 mm 240 mm
9.27 in. 9.80 in.
During standby During storage/
transportation
-20 to 60 (°C) -20 to 60 (°C)
-4 to140 (°F) -4 to 140 (°F)
8-95 8-95
D
209