Fujitsu ScanSnap S300 Operator's Manual page 61

2. Load the document onto the paper chute.
Load the document so that the front side of the two-sided document (the first page when the
document contains more than one sheet) faces the paper chute.
When loading a document stack, control the volume so as not to exceed a thinkness of 1 mm
at a time.
In the [ScanSnap Manager -Scan
ATTENTION
and Save Settings] dialog box, select
the [Scanning] tab, and then click the
[Option] button. In the [Read mode
option] dialog box displayed, check
whether the [Set the documents with
its face up] checkbox is marked. If
marked, load the document its face
up and the bottom edge into ADF.
When scaning long-size documents, pull up the Paper chute guide and open
HINT
the extension in the order given.
3.3 Loading Documents
Paper chute guide
ScanSnap S300 Operator's Guide
Paper chute
Side guide
Paper chute
41
3