Fujitsu ScanSnap S300 Operator's Manual page 142

Print options
[Keep data used for printing as files] checkbox
[Do not show this dialog again] checkbox
[Print] button
[Cancel] button
[Help] button
⇒
Printing is performed.
ATTENTION
122
You can change settings as follows:
Copies
You can specify the number of copies you want to print.
Select a number between 1 and 99.
Same size/Scaling down
You can select an output size of images; you can fit output images to paper
size or print them in original size.
Shrink to paper size:
Images larger than a paper size are scaled down to the paper size so that the
whole image can be printed on a sheet of paper. Images smaller than a page
size are printed in their actual sizes (same size).
Same size:
Images are printed in their original sizes.
[Allow automatic rotation] checkbox
Images are rotated according to the length-to-width ratio of images so that
they can be printed in either portrait orientation or landscape orientation,
whichever best fits.
[Center the image and print] checkbox
Images are centered and printed.
PDF files are saved in a folder specified in the [Image saving folder] drop-down
list on the "[Save] tab" (page 54)
Settings] dialog box.
You will not see the preview window from the next time.
You can skip step 7.
Clicking this button prints images using settings configured in this dialog box.
Clicking this button cancels all changes made in this dialog box and returns you to
the previous window (the ScanSnap Quick Menu Mode).
You can view Help topics related to the preview window.
•
Once the ScanSnap Quick Menu is displayed, the ScanSnap does not work
until the [Scan2Print] dialog box is closed, even if you press the [SCAN]
button. Complete the action before scanning another document.
•
Do not move, delete, or rename files in other applications after the ScanSnap
Quick Menu is displayed and before the [Scan2Print] dialog box is closed.
of the [ScanSnap Manager - Scan and Save