6.4 Print Prohibited Area
If there is printing in area A, the document size may be mis-detected. If there is printing in area B
of a document, it may cause double-feed errors. The following figure shows print prohibited areas
on a document. If double-feed detection is to be enabled, it is recommended that you avoid
printing in these areas. These restrictions must be considered when designing forms and
documents.
For the details of double-feed detection, please refer to "APPENDIX2 DOUBLE-FEED
DETECTION CONDITIONS" on page AP-2.
Reading
reference
position
Center of document
113 (4.45")
134 (5.28")
79 (3.12") 96 (3.78")
Front side
Reading surface
10
10
34 (1.34")
(0.39")
(0.39")
(Unit : mm)
Top of document
: Area A
: Area B
Bottom of document
10
10
(0.39")
(0.39")
6.4 Print Prohibited Area
6
6-7