Fujitsu FI-4860C Operator's Manual page 259

23. Setting Baud rate of TPS interface
1) Press (Next button) or
<Screen23>.
2) At <Screen23>, press
select Baud rate.
The blinking item is the one selected.
HINT
Baud rates available are as follows:
(1) 19200 bps
(2) 9600 bps
(3) 4800 bps
(4) 2400 bps
By pressing
By pressing
Baud rate at 9600 bps is recommended.
HINT
3) Press (Enter button) to confirm the setting.
Press (Exit button) at the end and the LCD display goes back to [Ready]
screen.
(Previous button) and let LCD display
<Screen23>
! 2 3 B
= 1 9 2 0
(Left arrow button) or
(Left arrow button), selection moves from (4) to (1).
(Right arrow button), selection moves from (1) to (4).
a u d R a t
0 / 9 6 0 0 /
(right arrow button) and
7.3 Setup Mode Details
e
4 8 0 0
7-53
7