Fujitsu FI-4860C Operator's Manual page 257

21. Setting SCSI bus width
1) Press (Next button) or
<Screen21>.
2) At <Screen21>. If Wide SCSI (68pin) interface is used, press
button) and select [16].
If SCSI-2 (50pin) interface is used, press
The blinking item is the one selected.
HINT
3) Press (Enter button) to confirm the setting.
Press (Exit button) at the end and the LCD display goes back to [Ready]
screen.
If 16 bit bus width data transfer is prohibited, specify 8 bit.
ATTENTION
(Previous button) and let LCD display
<Screen21>
! 2 1 S C
= W i d t
S I B u s
h 8 / 1 6
(Left arrow button) and select [8].
7.3 Setup Mode Details
7
b i t
(Right arrow
7-51