Hole-Punching Prohibited Areas - Fujitsu FI-4860C Operator's Manual

6.3 Hole-punching Prohibited Areas

Punched holes in the shaded areas may cause errors.
For job separation sheet requirements, please refer to the section "6.6 Job Separation Sheet" on
page 6-9.
Reading
reference
position
6-6

6.3 Hole-punching Prohibited Areas

113 (4.45")
79 (3.12") 96 (3.78")
10 10 12 12
(0.39") (0.39") (0.47") (0.47")
Front side
Reading surface
10 10
(0.39") (0.39")
Center of document
134 (5.28")
(Unit : mm)
10 10
(0.39") (0.39")
Top of document
Bottom of document