Fujitsu FI-4860C Operator's Manual page 226

3. Setting Pick Speed
1) Press (Next button) or
<Screen3>.
2) At <Screen3>, press
select Pick roller rotation speed.
HINT
3) Press (Enter button) to confirm the setting.
Press (Exit button) at the end and the LCD display goes back to [Ready]
screen.
HINT
Picking speed
Fast (Factory default)
Mid
Slow
HINT
7-20 7.3 Setup Mode Details
(Previous button) and let the scanner show
<Screen3>
! 0 3
= F a
(Left arrow button) or
The blinking item is the one selected.
Pick roller rotation speed should be set Slow for scanning thin or soft docu-
ments, these documents tend to cause a Mis-pick to occur.
When Mis-pick occurs frequently
Decreases the Pick speed
When the Pick speed is set at "Mid" or "Slow", the scanner will slow down.
P i c k S p
s t / M i d /
(Right arrow button) and
e e d
l o w
S